Setup Router Tips: Steps to Use a Router at Home

Router Setting

Did you install wifi or Setup Router at home? Or maybe you want to use the internet at home using wifi, of course you use a device called a router. A router is a device that connects two or more packet-switched networks or subnets.

Before reading further Setup Router, for those of you who want to know more about Netdata, you can contact us directly via the link below.

Consultation Via Whatsapp

Routers can serve two main functions: managing traffic between these networks by forwarding data packets to their intended IP addresses, and allowing multiple devices to use the same Internet connection.

So do you need this router in your home? Let’s discuss the correct steps for using a router at home!

How to Setup Router at home

Think of routers as air traffic controllers and data packets as planes heading to different airports (or networks). Just as each plane has a unique destination and follows a unique route, each packet needs to be guided to its destination as efficiently as possible.

In the same way that air traffic controllers ensure that planes reach their destinations without getting lost or experiencing major disturbances along the way, routers help route data packets to their destination IP addresses.

To be able to do this, the router must be set to do its job properly. How to set it? The method is quite easy. Let’s discuss below:

Connect Modem with Router

The first way is to connect the modem to the router. Don’t plug your router into a power outlet just yet. Instead, the first thing you’ll do is connect your modem to the WAN port with an Ethernet cable.

  • Step 1: Not sure what the WAN port is? Most consumer routers have a group of Ethernet ports, some of which are called LAN (local area network) ports and others called WAN (wide area network) ports.

WAN ports look the same as LAN ports, but are often different colors and spaced apart. In the photo above, for example, the WAN port is yellow and labeled Internet. Sometimes it will be labeled WAN. This port is meant to connect your router to your modem and the outside world from there. The LAN port is designed for connecting to local devices.

  • Step 2: Plug one Ethernet cable into your modem and the other end into your router’s WAN port. Then, plug your router’s power adapter into the wall.

Connect Computer with Router

Next, give your router a minute to start up and create a network. After that you can connect it to the computer.

Manually connect the computer to the router using an Ethernet cable. Once you are connected, go to your router’s configuration page.

Open the Router Admin Site then Log In

To do router settings on a website. This page is the website hosted on your router, and it is the traditional way of configuring your router settings. How to find it can vary, but almost always routers will have an IP that is and you can type it into the address bar of your browser of choice and press Enter.

If you find the page, go ahead and skip to the next step. However, if that address doesn’t work, your router may be using another address entirely. This address may vary depending on your router, so refer to your router’s official documentation if the address doesn’t work.

Enter Information Regarding Internet Connection

Your router app will automatically guide you through the setup procedure, so answer the questions and fill out the required forms. For most new routers, you will be asked to create an application name (again, this is called the SSID) and a password

  • Step 1: WPA2 encryption is currently the security standard, and you should always select it if given an option for your security protocol. Make sure you also choose a long password, which is different from the admin password you previously set.
  • Step 2: However, the used router may already have a password and will need to be reset. Most routers have a hidden reset button on the back. Holding down the Reset button with a paperclip for at least 30 seconds should work. Leave the power on, and wait for the router to rest.

It should use the default settings when it restarts, which means the default username and password will now give you access to the settings.

Router Settings

The router app should also allow you to set other settings such as parental controls, automatic updates, and more. You can change these settings and more later from the app, but pay attention to the guide and everything it teaches you.

You should learn about guest access, monitoring activity, and more. Once done, the app will configure network settings and finalize your network settings. You can learn more about the configuration you want for the home router you are going to use.

How to Use Routers

After knowing how to set up a router at home, how do you actually use a good and correct router to suit its functions?

Perform Cable Installation

The first thing to do is wiring. Connect your router to your modem. Wireless routers and routers allow you to share your broadband internet connection with multiple devices. To do this, you need to connect your broadband modem to the router. For best results, place your router near your modem.

You can connect it using an ethernet cable.

Cable installation is also carried out from the router to the computer. Installation of point one to point two must be in accordance with the instructions.

Perform Router Installation

Once connected, do the router installation. You can install the router using the IP address or CD that is usually provided by the router itself which is available in the purchase package.

Turn on the Router

If you want to use a router, of course, is by turning on the router itself. When turning on the router, make sure every light is green indicating the router is running properly.

If you experience problems with the router, immediately contact the provider of the router.

Connect Network to Device

After the router settings are complete, it’s time to connect the network to the device. Make sure you install a clear username and password and the appropriate password during the installation process.

After that, you can connect to your device when the connection to the router appears.

Reboot Router If Connection Troubled

The most obvious and most reliable step is to reboot the router if you experience interference. Just press the restart or power button, the router will automatically reboot. Just wait for the router connection to appear on your device.

If you are interested in our product or service offering, please contact us via this link or you can also use our contact form here.


Leave a Reply

Your email address will not be published. Required fields are marked *

Semua operasional PT. Network Data Sistem akan menggunakan domain per tanggal 8 Mei 2019. Semua informasi/promosi dalam bentuk apapun selain menggunakan domain bukan tanggung jawab PT. Network Data Sistem Dismiss