Mikrotik setting services. The need for internet networks is not a luxury anymore. Where the internet itself is the largest network of several existing small networks such as LANs, WANs, and so on.
Indirectly, we can access any website anywhere in seconds depending on the bandwidth of the internet service provider.
To connect to the internet, of course we need a network device called a router. Router is the process of sending data packets with a computer network from one device to another.
The MikroTik operating system is designed as a network router. It is an operating system and software that can be used to turn your computer into a reliable network router. This computer includes a wide range of features for IP networking and wireless networking. These functions include Firewall & Nat, Bandwidth Limiter, Routing, Hotspot, Point to Point Tunneling Protocol, DNS server, DHCP server, Hotspot, and many other features.
In a network that has multiple clients, this requires adjusting the bandwidth of the mechanism to prevent the bandwidth from exceeding the limit. All clients get their bandwidth fairly. Bandwidth Management is the method used to meet these needs. Limiting bandwidth at MikroTik Hotspot is required to perform. The wireless hotspot can be accessed anywhere to whom it may have an access policy. Bandwidth limitation is necessary to promote equity and prosperity evenly across all hotspot users.
However, unfortunately, nowadays there are still many who can’t get the Mikrotik settings they have to get equal access for all users. Therefore, if you are looking for a Mikrotik setting service that is guaranteed to have very satisfying results, then you can just entrust it to Netdata which ensures that your Mikrotik can run stably and optimally.
To operate this router, we need to use a special operating system, one of which is Mikrotik. What is Mikrotik? In this article we will discuss further about Mikrotik and its functions, let’s look at it below.
Mikrotik is an operating system used to operate a network router. This operating system is used for computer network administration purposes, for example in the development of small and large scale computer network systems.
Unlike the Mikrotik with the old operating system is the wireless feature. Where this Mikrotik is called one of the lightest and simplest operating systems. Therefore, many small businesses such as internet cafes use Mikrotik as their network operating system.
However, many people still find it difficult to distinguish Mikrotik from routers. The router itself is a hardware device that serves to bridge the two networks. Meanwhile, Mikrotik is an operating system that is an open source system but that does not mean it includes free software.
Mikrotik is widely used by ISPs, hotspot providers, or internet cafes or internet cafes. Various features offered by Mikrotik such as bandwidth management, hotspot for plug-and-play access, stateful firewall, remote winbox admin GUI, and routing.
Functions Functions There are three most common themselves as below.
- Connecting the Network
The router function is as a network connector. As already explained, this router has a function to connect several networks so that users can send data from one network to another.
The connection process is by distributing IP addresses to each computer on the network either statically or automatically using DHCP (Dynamic Host Configuration Protocol).
- Transmitting Information
The function of the second router is transmitting information. Transmits information or data from a network to another network. Indeed, this work system is similar to the Bridge work system.
- Connecting the network to DSL
The third router function is to connect the local network with a DSL router or Digital subscriber line connection.
Currently routers no longer have to use an ethernet cable or LAN, but are currently using wireless technology or wireless.
function on Mikrotik ARP function on Mikrotik, what is ARP? ARP or short for Address Resolution Protocol, which is a connecting protocol between the data-link layer and the Network.
The ARP function itself is to find the MAC address of a computer connected to a local network or LAN by using the IP address of that computer. And also ARP can also be used to limit bandwidth.
The function of Address Per Mac Mikrotik Hotspot
Address per MAC Mikrotik This is a command in Mikrotik settings. Its function is to prevent duplicating the MAC address of a computer connected to the Mikrotik.
The trick is to set the servers tab, then double-click the name of the connected hotspot server.
In the address per MAC column, enter number 1 which can only be one IP address for one MAC address.
Mikrotik Bridge Function
Actually, the use of the Mikrotik router itself is for routing to the existing ethernet to connect networks with different IP segments and different routers.
However, some cases require us to use 2 interfaces at the same time to the same destination.
For example, making 2 APs with different rooms but having the same IP segment, the way is to combine the 2 interfaces as if they only have one interface, the technique of combining these 2 interfaces is called a Bridge.
DHCP Relay Function in Mikrotik
The DHCP Relay function in Mikrotik is a method for distributing IP addresses to computer devices by utilizing a centralized DHCP server on another router.
In other words, the router only becomes a DHCP relay which forwards DHCP requests from the computer to the DHCP server.
This is very helpful if other computer devices are not in the same Network with the DHCP server.
DNS function in Mikrotik
DNS or Domain Name System on Mikrotik is a Distributed Database System that is used to look up computer names using TCP / IP.
DNS itself is an application service commonly used on the internet such as a web browser or e-mail that translates a domain into an IP address.
For example, when we search for the site www.google.com, it has an IP address of 22.214.171.124.
So that DNS can be analogous to a telephone book that looks for the Google IP address number.
FunctionFirewall On Mikrotik
Function FirewallMikrotik,Mikrotik is also equipped with a firewall where filtering of access is called the Rulefilter,forwarding NAT,and also marks the connection as well as packets of data traffic passing through the router Mangle.
In order for a Firewall to work properly, an appropriate rule is needed. There are several main parameters in the rule in this Firewall feature, namely this Chain parameter has the function to determine the type of traffic that will be set in the Firewall feature.
IP Tunnel Function in Mikrotik
IP tunnel function in Mikrotik, Tunneling is a method for building a path between Mikrotik routers over a TCP / IP.
For example, a local network in a company can communicate with the company’s branch offices to be able to exchange information and exchange data.
Keepalive Timeout Function in Mikrotik
The Keepalive timeout function in Mikrotik is the time when an active user (authorized user) will automatically log out of Mikrotik after the user logs out / shutdowns or physically disconnects from Mikrotik.
Mac Cookie TimeoutMikrotik
function inMAC Cookie Timeout function in Mikrotik storage time for MAC device addresses on cookies, if it is still within the cookie timeout and wifi disconnect so that you log back in without the need to enter your user id.
Previously, check Add MAC Cookie first to activate MAC Cookie Timeout.
Mangle Function in Mikrotik
The Mangle function on Mikrotik is one of the features on the Mikrotik Firewall which is used to mark / mark a data packet.
function The function of the Mikrotik routerboard is to manage access rights on the network to the access rights of each personal computer on the network.
Routerboard can also be used as a bandwidth management tool for networks connected to a global network (internet).
A routerboard is an instant device produced by a hardware company, so that the admin only configures the operating system that is embedded in the routerboard using Mikrotik.
The Nat function in Mikrotik
NAT is a mapping of IP addresses so that many private IPs in a LAN can access public UPs. We will find that private IP is only used in LAN and cannot be used for public IP.
With this process, many computers can access the internet using the NAT mechanism.
NAT function lies in the modem. Modems that are often used are ADSL modems. ADSL modem uses a telephone cable as a medium connecting to the provider.
From this modem, the connection can be shared using a switch / hub so that many computers can access the internet.
Passthrough function in Mikrotik
Since the Mikrotik router operating system version 6.41, some LTE devices can support the Passthrough feature.
The Passthrough feature on Mikrotik allows us to configure IP, DNS, Gateway which is applied directly to the user’s device. So that the Passthrough feature on the LTE interface is quite different from the Passthrough found in the Firewall filter.
When we configure the LTE device Passthrough, we only function the LTE device as a signal catcher. There is more than one simple configuration that we can apply like configuring APN, IP-Type etc. Configuring IP Address, DNS, Gateway we carry out on client devices.
Radius function in Mikrotik
Radius function on Mikrotik or Remote Authentication Dial-In User Service is a client-server network protocol used to manage authentication, authorization and accounting of users connected to the network.
The RADIUS server runs at the layer 7 application and can use TCP or UDP as the transport.
RADIUS is currently specifically developed by Mikrotik which is used as authentication and authorization for Mikrotik users.
Redirect Function In Mikrotik
Redirect is one of the commands from Mikrotik, the redirect function as a technique used to redirect domain visitors to a different URL.
You can forward the domain name to any website that is available online. This time someone is typing or clicking on the real URL but then they will be taken to another website that you previously set up.
Mikrotik Router Functions The
functions of the Mikrotik router most common themselves are 4 types, namely:
Running the access capacity or bandwidth management application.
The Mikrotik router function is an application that can show how much data a router can pass to connect to other internet devices. To get to know the various ways to reset the proxy, you can check here .
Mikrotik itself has a function to adjust the access capacity of internet users and view traffic on that bandwidth.
Running a firewall application
When talking about a firewall, of course we will discuss network protection or security on computers connected to the network. Mikrotik router has the ability to manage Firewall so you can know if the network is safe or not.
Running the WiFiapplication
Wifiis now widely spread in various places. Therefore, a Mikrotik router is needed to regulate who may have access to the wifi network.
Running the hotspot system
Mikrotik Router can be used as a hotspot. So you can access wifi from a computer or gadget without using a cable.
Torch function in Mikrotik
The Torch function in Mikrotik is a tool used to view real time bandwidth. That way we can monitor bandwidth usage on every device connected to Mikrotik.
Vlan function in Mikrotik
VLAN or an abbreviation of Virtual LAN is a feature created to create third party networks. With VLAN, we can configure several devices in one or more locales so that they can communicate as if the devices are connected to the same line even though the devices are actually in different network segments.
Types of Mikrotik Types
For the types of Mikrotik currently being developed are divided into two, namely Mikrotik RouterOS and RouterBoard, below is a discussion of these types of Mikrotik.
Mikrotik RouterOS is a UNIX-based operating system that can make ordinary computers able to provide network device features, such as routers, firewalls, bridges, hotspots, proxy servers and others.
If previously Mikrotik RouterOS was a software operating system, RouterBoard is actually a network hardware developed by Mikrotik. RouterBoard also has a Mikrotik RouterOS operating system with a small and practical physical size.
Mikrotik Router Setting Services
Internet access today is an important aspect. You need to find information or play online games. Distribution of very high bandwidth is an important thing that must be done by internet service providers. This can be done using a computer or device that can limit internet speed. Mikrotik Router is a hardware and software vendor that provides facilities for managing bandwidth.
It also provides an operating system specifically used for creating routers. This is done by installing it on your computer. The tools provided in Mikrotik Router are well equipped to build a stable and reliable router.
A router that runs well will allow you to access the internet fast and also with the maximum network. Therefore, with those of you who want the Mikrotik router settings that you have, you can just entrust it to Netdata which is theMikrotik setting service best.
The Most Trusted and Best Mikrotik Setting Service
What makes so many people entrust Netdata for Mikrotik setting services is a satisfactory result. This is because all the workers in Netdata for setting up your Mikrotik are well experienced. Then, compared to the others, Netdata guarantees that the results are very good with a guarantee if at any time there are more problems with your Mikrotik.
Then, for the price issue, don’t worry, one of the things that makes Netdata rely so much in terms of Mikrotik settings is that it is cheap and with maximum results. Very profitable, right?
How to Connect Mikrotik to the Internet
The Mikrotik function especially if it is not a connection for our computer devices to the internet. Therefore,I needed a Mikrotik configuration so that it can connect to the internet. You can follow several Mikrotik configuration steps below:
- Log in to the Mikrotik device.
- Open the Wireless Tab.
- Double-click WLAN1.
- Then click SCAN.
- After we press SCAN then press the START button.
- We select the Network that we want to connect to our Mikrotik.
- Enter the password if it’s on the Wireless Tab> Security Profiles.
- Fill in Security Profiles with a free name then fill in the Password according to the Network you want to connect to Mikrotik.
- After entering the Security Profiles then select the Wireless Tab> Interface> WLAN1.
- Now we go to the IP tab> Addresses.
- We add the IP Address and select the interface according to the LAN cable that Mikrotik will connect to the laptop.
- After successfully adding the IP Address, it appears on the IP tab> Addresses is like this.
- Go to tab IP> DHCP client and add DHCP for our client.
- After we add the DHCP client we have to make sure that the status of the DHCP client is bound.
- We open IP> DHCP server then we add the DHCP setup.
- We must choose the DHCP server interface according to the LAN connected from Mikrotik to the computer.
- Go to IP Tab> Firewall> NAT. (With the general chain tab> scrnat & out.interface> wlan1)
- (With the Action tab> masquerade)
- Finally we can check the internet connection by pinging 126.96.36.199.
Those are some things we can discuss about Mikrotik which is quite complete. However, if you have a network that requires professional Mikrotik setup services on NetData or you can visit NDS.id.