How to Configure Aruba Instant Wifi – Nowadays, the network has been advancing over time, the advancing era has resulted in many variations of companies engaged in the network competing to result in many variations of new inventions to lure potential customers. There is one network company that has experience in networking and is trusted by many companies and governments, especially if not the Aruba Network.
Aruba Network, formerly known as Aruba Wireless Networks, is a Hewlett Packard Enterprise wireless network subsidiary based in Santa Clara, California. The company was founded in Sunnyvale, California in 2002 by Keerti Melkote and Pankaj Manglik.
There are tons of products released by Aruba for modern networks and counting along with a variety of different inventions along with others, which is sure to really help. Various products come from Aruba Network in other:
- Network: Wi-Fi Access Points (indoor & outdoor), Ethernet Switch, Wireless LAN Controller (WLC) & SD-WAN products
- Network Management: AirWave Management Platform, Cloud-based Center; Enable for asset inventory management & provision
- Network Security: ClearPass Policy Manager for Network Path Control; IntroSpect for User & Entity Behavior Analytics (UEBA)
- Analytics & Service Assurance: NetInsight; Service Assurance Censorship (formerly Cape Networks)
- Location Based Services: Aruba Beacons, Aruba Tag, Meridian Location Services Engine, Meridian App Builder, Location Analytics Engine (ALE)
How To Configure Aruba Network Instant Wifi Easily
Okay, now discussing Aruba Instant wifi. This hardware from Aruba is indeed very high quality. If you want to network the internet, be sure to use Aruba. However, there is something you need to know, namely how to set Aruba Instant wifi. Here’s how:
- Remove the device from the box.
AC adapter plug and internet cable to ENET port.
- Turn on the power.
After the 11 A / N or 11B / G / N front light turns green, the AP Instant is ready for setup (takes 20-30 seconds).
- Instant SSID setup
Try an instant SSID scan, if the SSID is out, please continue to the next step.
- Open your browser
Open your browser by typing
- Open the website on Instant login
To log in using user: admin password: admin
- Starting settings for employee wifi part 1
Click NEW to cause the SSID to import an SSID for example: ACME. define “Employee” in primary usage and click next. In the Client IP assignment option, determine the Network assigned, and the client vlan assignment determines the default.
- Part 2
The next option is “Security Levels” for your network.
- Part 3
With AP Instant you can cause access policy checks to block shared users with network-based roles or protocols such as FTP, HTTP, ICMP and many others. In this example, we give additional employees unlimited access.
- Part 4
Click FINISH and you have just finished executing the configuration for your employees.
Next we will create a new ssid for the guest user.
- Part 1
Click NEW to cause the guest specific SSID, here we will configure wifi for shared guests with a limit of 1.5 Mbps.
- Part 2
Next create a login page portal for guest users. In this example, we specify “internal-acknowledge” only for guest user activity and do not require guests to only provide their additional email address and agree on the terms and conditions that we create.
- Part 3
The last step is to establish a policy to control wifi access for guests. In this example the guest only allows internet access with HTTP, HTTPS, and DNS. And denying access to everything else.
- Part 4
Configuration for guest wifi limit has been completed by implementing some policies.
If you interested, you can contact us directly here.
