RG-S2910XS-E Series Switches
Ruijie Switch RG-2910 Series is a collection of next-gen Gigabit switches architected for superior security, switch delivers Non-blocking / wire-speed，high performance and outstanding energy efficiency. The series delivers full Gigabit access and unparalleled scalability to 10G performance. With the all-new hardware architecture and Ruijie’s latest RGOS11.X modular operating system, the RG-S2910XS-E/P switches offer larger table capacity, faster hardware processing performance and a better operation experience than anything previous. In addition, the PoE models in various specifications support all downlink ports running on PoE+ and fulfill high bandwidth demand of 10G uplink. The RG-S2910XS-E/P switches guarantee high-density user access and leading aggregation performance with ease.
Features
RG-S2910XS-E Series New-Generation Efficient and Energy-Saving Switches
- Power consumption reduced by 40% compared with similar products
- Multi-process modular OS RGOS 11.X developed by Ruijie Networks
- SDN features and compliance with OpenFlow 1.3
- Switch zero-configuration via TR069
- Diverse ports
Secure and Reliable Hardware and Software
- 3-month reliability testing (concerning high and low temperature tolerance, vibration, electromagnetic interference, power surge, signal tests, etc.)
- Hardware and software-level CPU Protection Policy (CPP)
- Accurate traffic statistics
- Unified management and control of 9 virtualized devices
Creating New Green and Energy-saving Devices
- Compared with the RG-S5750-S products with the same configuration, the S2910XS-E reduces power consumption by more than 40% .
- Compared with the RG-S2900G-E products with lower configuration, the S2910XS-E reduces power consumption by about 10% .
- High-level integration between the MAC chip and CPU, featuring high stability, high reliability, and low-power consumption
- 512 MB memory and 256 MB flash memory, preventing internal processing bottlenecks
- A single device supports a maximum of 24/48 gigabit electrical ports and four 10GE SFP ports, and can support line-rate forwarding.
- PoE switches are configured with two multiplexing downlink SFP ports and two fixed 10GE SFP ports, and can be expanded with two 10GE ports to meet flexible expansion requirements.
- High-end PoE switches are equipped with USB ports for device upgrades, log backup, and security identification.
- Components (processes) are independent. A breakdown of one component (process) will not affect other components. Compared with non-modular OSs, the possibility of a host reset is reduced by 98%. For example, if the STP component (process) breaks down, the whole device does not reset.
- Component (process) faults can be automatically rectified. For example, if the STP component (process) breaks down, only the component (process) instead of the whole device will be automatically restarted and be restored to the normal state for running.
Derating design for all components, ensuring universal quality standards for all products
- Power: High-quality power supplies for use in altitudes ranging from –500 m to 5000 m
- Fan: Fans with smart speed adjustment to prolong the fan lifespan
- Dampproof, dustproof, anti-corrosion, anti-fog, anti-salt fog performance with conformal coating to fit different environment
- The hardware and software-level CPU Protection Policy (CPP) and Network Foundation Protection Policy (NFPP) are combined.
- The CPP developed by Ruijie Networks can summarize the quantity of traffic destined for the CPU by category and assign them different priorities to ensure stable CPU running.
- Combined with the NFPP, the CPP can effectively prevent various attacks to offer the highest-level protection to the CPU and ensure the normal running of various services, thereby guaranteeing stable running of all devices on the network.
- The PoE models complying with 802.3af and 802.3at standards offer dual modular power supplies, supporting PoE+ on all the downlink ports.
- The switch is equipped with a one-click switching button. Press the button to view the status of current communication and power supply.
- Power supply to STAs is not interrupted during restart of the HPoE power supply host
- Easy management:
The VSU is regarded as one switch in the network .Administrators can centrally manage all the devices at the same time. - Millisecond failover:
The VSU and peripheral devices connected via the aggregation link. Upon failure event of any device or link, failover to another member link requires only 50 to 200ms. - Exceptional scalability:
The network is hot swappable, any devices leaving or joining the virtualized network cause zero impact on other devices.
- IEEE802.3az (EEE) energy-saving technology
- Better compatibility with ideal energy-saving effects
- Ports switch to low power mode when the Ethernet connection is idle to reduce the TX signal power of ports. When data needs to be forwarded over ports, the ports automatically switch back to the normal operating mode.
Depending on the current fan operating mode, the system automatically sets a default initial rotational speed of the fan. As the ambient temperature changes, the rotational speed of the fan increases or decreases accordingly. The noise can be effectively muted at certain temperature levels, achieving efficient heat dissipation with the lowest noise.
Energy-saving technologies, no PHY for SFP ports, port sleeping, smart fan speed adjustment……are aimed for energy-saving.
|
Model |
RG-S2910-24GT4XS-E |
RG-S2910-48GT4XS-E |
RG-S2910-10GT2SFP-P-E |
RG-S2910C-24GT2XS-P-E |
RG-S2910C-24GT2XS-HP-E |
RG-S2910C-48GT2XS-HP-E |
|
Model |
RG-S2910-24GT4XS-E |
RG-S2910-48GT4XS-E |
RG-S2910-10GT2SFP-P-E |
RG-S2910C-24GT2XS-P-E |
RG-S2910C-24GT2XS-HP-E |
RG-S2910C-48GT2XS-HP-E |
|
Ports |
24 10/100/1000BASE-T ports |
48 10/100/1000BASE-T ports |
10 10/100/1000BASE-T ports 2 100/1000BASE-X SFP ports (non-combo) |
24 10/100/1000BASE-T ports (PoE/PoE+) |
24 10/100/1000BASE-T ports (PoE/PoE+) |
48 10/100/1000BASE-T ports (PoE/PoE+) |
|
Expansion Slots |
N/A |
N/A |
N/A |
1 |
2 |
2 |
|
Modular Power Slots |
N/A |
N/A |
N/A |
N/A |
2 |
2 |
|
Fan Slots |
Fixed |
Fixed |
Fanless |
Fixed |
Fixed |
Fixed |
|
Expansion Modules |
N/A |
N/A |
N/A |
M2910-01XS |
M2910-01XS |
M2910-01XS |
|
Management Ports |
1 console port |
1 console port |
1 console port |
1 console port |
1 console port |
1 console port |
|
Switching Capacity |
264Gbps |
264Gbps |
256Gbps |
264Gbps |
264Gbps |
264Gbps |
|
Packet Forwarding Rate |
96Mpps |
132Mpps |
18Mpps |
96Mpps |
96Mpps |
132Mpps |
|
Max. Number of 10GE Ports |
4 |
4 |
N/A |
4 |
4 |
4 |
|
PoE |
N/A |
N/A |
IEEE802.3af and 802.3at power supply standards; Automatic/energy-saving (default) power supply mode; Hot startup and uninterrupted power supply; Port priority; PoE devices support stacking |
IEEE802.3af and 802.3at power supply standards; Automatic/energy-saving (default) power supply mode; Hot startup and uninterrupted power supply; Port priority; PoE devices support stacking |
IEEE802.3af and 802.3at power supply standards; Automatic/energy-saving (default) power supply mode; Hot startup and uninterrupted power supply; Port priority; PoE devices support stacking |
IEEE802.3af and 802.3at power supply standards; Automatic/energy-saving (default) power supply mode; Hot startup and uninterrupted power supply; Port priority; PoE devices support stacking |
|
Port Buffer |
1.5MB |
|||||
|
RAM |
512MB |
|||||
|
ARP Table |
1,000 |
1,000 |
500 |
1,000 |
1,000 |
1,000 |
|
MAC Address |
16K |
|||||
|
Routing Table Size |
500 (IPv4/IPv6) |
500 (IPv4/IPv6) |
64 (IPv4/IPv6) |
500 (IPv4/IPv6) |
500 (IPv4/IPv6) |
500 (IPv4/IPv6) |
|
ACL Entries |
In: 1,500 |
In: 1,500 |
In: 750 Out: N/A |
In: 1,500 |
In: 1,500 |
In: 1,500 |
|
VLAN |
4K 802.1q VLANs, Port-based VLAN, MAC-based VLAN, Protocol-based VLAN, Private VLAN, Voice VLAN, QinQ, IP subnet-based VLAN, GVRP, Guest VLAN |
|||||
|
QinQ |
Basic QinQ, Flexible QinQ, 1:1 VLAN switching, N:1 VLAN switching, 1:N VLAN switching |
|||||
|
Link Aggregation |
AP, LACP (maximum 8 ports can be aggregated), Cross devices AP, Flow balance |
|||||
|
Port Mirroring |
Many-to-one mirroring, One-to-many mirroring, Flow-based mirroring, Over devices mirroring, VLAN-based mirroring, VLAN-filtering mirroring, AP-port mirroring, RSPAN, ERSPAN # RG-S2910-10GT2SFP-P-E supports N:1/1:N port mirroring, Flow-based mirroring |
|||||
|
Spanning Tree Protocols |
IEEE802.1d STP, IEEE802.1w RSTP, Standard 802.1s MSTP, Port fast, BPDU filter, BPDU guard, TC guard, TC protection, ROOT guard，Spanning Tree Root Guard(STRG) |
|||||
|
DHCP |
DHCP server, DHCP client, DHCP snooping, DHCP relay, IPv6 DHCP snooping, IPv6 DHCP client, IPv6 DHCP relay，DHCP Snooping Option 82 |
|||||
|
Multiple Spanning Tree Protocol (MSTP) Instances |
64 |
|||||
|
Maximum Aggregation Port (AP) |
128 |
|||||
|
SDN |
OpenFlow 1.0 & 1.3 |
|||||
|
VSU (Virtual Switch Unit) |
Support (up to 9 stack members，to ensure the effectiveness of the use, 4 members are recommended* ), Local and distant stacking, Cross-chassis link aggregation in the stack, Stacking via 10G Ethernet ports # All models support the features above except RG-S2910-10GT2SFP-P-E |
|||||
|
SCN (Simplicity Campus Network) |
Support establishing large L2 network with core devices and achieve resources pooling via VSU and VSD. Only management on core devices is required and hence simplifies horizontal and vertical network management and maintenance. # All models support the features above except RG-S2910-10GT2SFP-P-E |
|||||
|
Zero Configuration |
CWMP(TR069) |
|||||
|
L2 Features |
MAC, EEE, ARP, VLAN, Basic QinQ, Felix QinQ, Link aggregation, Mirroring, STP, RSTP, MSTP, Broadcast/Multicast/Unknown unicast storm control, IGMP v1/v2/v3 snooping, IPv6 MLD Snooping v1/v2，IGMP SGVL/IVGL, IGMP querier, IGMP filter, IGMP fast leave, DHCP, Jumbo frame, RLDP, LLDP, LLDP-MED, REUP, G.8032 ERPS, Layer 2 protocol tunnel |
|||||
|
Layer 2 Protocols |
IEEE802.3, IEEE802.3u, IEEE802.3z, IEEE802.3x, IEEE802.3ad, IEEE802.1p, IEEE802.1x, IEEE802.3ab, IEEE802.1Q (GVRP), IEEE802.1D, IEEE802.1w, IEEE802.1s |
|||||
|
IPv4 Features |
Ping, Traceroute |
|||||
|
IPv6 Features |
ICMPv6, IPv6 Ping, IPv6 Tracert, Manually configure local address, Automatically create local address |
|||||
|
IPv4 Routing Protocols |
Static Routing, RIP, OSPF v1/v2 |
|||||
|
Basic IPv6 Protocols |
IPv6 addressing, Neighbor Discovery (ND), ICMPv6, IPv6 Ping and IPv6 Tracert |
|||||
|
IPv6 Routing Protocols |
Static routing, RIPng, OSPF v3 |
|||||
|
Multicast |
IGMP v1/v2/v3, IGMP v1/v2/v3 snooping, IGMP proxy, IGMP filter, IGMP fast leave, Multicast routing protocols (PIM-DM, PIM-SM, PIM-SSM), MLD snooping, MLD, PIM-SMv6, Multicast static routing |
|||||
|
G.8032 |
Support |
|||||
|
ACL |
Standard/Extended/Expert ACL, Extended MAC ACL, ACL 80, IPv6 ACL, ACL logging, ACL counter, ACL remark, Global ACL, ACL redirect, Time-based ACL，Router ACL, VLAN ACL, Port-Based ACL |
|||||
|
QoS |
802.1p/DSCP/TOS traffic classification; Multiple queue scheduling mechanisms, such as SP, WRR, DRR, SP+WFQ, SP+WRR, SP+DRR; Input / output port-based speed limit; Port-based traffic recognition; Each port supports 8 queue priorities; flow-based rate limiting with the minimum granularity of 8Kbps，Dynamic QoS |
|||||
|
Reliability |
VSU (virtualization technology for virtualizing multiple devices into 1); RIP GR; ERPS (G.8032); REUP dual-link fast switching technology; RLDP (Rapid Link Detection Protocol) |
VSU (virtualization technology for virtualizing multiple devices into 1); RIP GR; ERPS (G.8032); REUP dual-link fast switching technology; RLDP (Rapid Link Detection Protocol) |
RIP GR; ERPS (G.8032); REUP dual-link fast switching technology; RLDP (Rapid Link Detection Protocol) |
VSU (virtualization technology for virtualizing multiple devices into 1); RIP GR; ERPS (G.8032); REUP dual-link fast switching technology; RLDP (Rapid Link Detection Protocol) |
VSU (virtualization technology for virtualizing multiple devices into 1); RIP GR; ERPS (G.8032); REUP dual-link fast switching technology; RLDP (Rapid Link Detection Protocol); 1+1 power redundancy; Hot-swappable power module |
VSU (virtualization technology for virtualizing multiple devices into 1); RIP GR; ERPS (G.8032); REUP dual-link fast switching technology; RLDP (Rapid Link Detection Protocol); 1+1 power redundancy; Hot-swappable power module |
|
EEE Format |
Support IEEE 802.3az standard |
|||||
|
Security |
Binding of the IP address, MAC address, and port address; Binding of the IPv6, MAC address, and port address; Filter illegal MAC addresses; Port-based and MAC-based 802.1x; MAB; Portal and Portal 2.0 authentication; ARP-check; DAI; Restriction on the rate of ARP packets; Gateway anti-ARP spoofing; Broadcast suppression; Hierarchical management by administrators and password protection; RADIUS and TACACS+;Change of Authorization; AAA security authentication (IPv4/IPv6) in device login management; SSH and SSH V2.0; BPDU guard; IP source guard; CPP, NFPP; Port protection， CoA（RADIUS change of authorization），SCP (Secure Copy)Dynamic ARP Inspection(DAI) |
|||||
|
Manageability |
SNMPv1/v2c/v3, CLI (Telnet / Console), RMON (1, 2, 3, 9), SSH, Syslog / Debug, NTP / SNTP, FTP, TFTP, Web, SFLOW，HTTP or HTTPS # RG-S2910-10GT2SFP-P-E supports SNMPv2c, CLI (Telnet / Console), Syslog, RMON (1, 2, 3, 9), Web |
|||||
|
Hot Patch |
Support |
|||||
|
Smart Temperature Control |
Auto fan speed adjustment; Fan malfunction alerts; Fan status check # All models support the features above except RG-S2910-10GT2SFP-P-E |
|||||
|
Smart Power Supply |
N/A |
N/A |
N/A |
Support power control and management |
Support power control and management |
Support power control and management |
|
Other Protocols |
FTP, TFTP, DNS client, DNS static |
|||||
|
Dimensions |
440 × 260 × 43.6 |
440 × 260 × 43.6 |
340 × 260 × 44 |
440 × 260 × 44 |
440 × 320 × 44 |
440 × 360 × 44 |
|
Rack Height |
1RU |
|
||||
|
Weight |
≤3.5kg |
≤4kg |
<2.5kg |
5.8kg (gross weight) |
5.8kg (gross weight) |
6.8kg (gross weight) |
|
MTBF (hours) |
614844 |
511280 |
590278 |
361726 |
501032 |
451363 |
|
Lightning Protection |
4KV | 4KV | 6KV |
6KV |
6KV |
6KV |
|
Power Supply |
AC input: HVDC input: |
AC input: HVDC input: |
AC input: Rated voltage range: 100V to 240V AC Maximum voltage range: 90V to 264V AC Frequency: 50/60Hz Rated current: 2A HVDC input: |
AC input: HVDC input: |
AC power (RG-M5000E-AC500P): HVDC input: DC power (RG-M5000E-DC500P): AC power (RG-RG-PA1150P-F): HVDC input: |
AC power (RG-M5000E-AC500P): HVDC input: DC power (RG-M5000E-DC500P): AC power (RG-RG-PA1150P-F): HVDC input: |
|
Power Consumption |
24W |
50W |
165W (with 8-port PoE or 4-port PoE+) |
470W (with full PoE) |
850W (with 24-port PoE+) |
1700W (with 48-port PoE+) |
|
PoE Power |
N/A |
N/A |
125W |
370W |
RG-M5000E-AC500P: 370W |
RG-M5000E-AC500P: 370W |
|
Temperature |
Operating temperature: 0°C to 50°C |
Operating temperature: 0°C to 50°C |
Operating temperature: 0°C to 45°C |
Operating temperature: 0°C to 50°C |
Operating temperature: 0°C to 50°C |
Operating temperature: 0°C to 50°C |
|
Storage temperature: -40°C to 70°C |
||||||
|
Humidity |
Operating humidity: 10% to 90%RH |
|||||
|
Storage humidity: 5% to 95%RH |
||||||
|
Operating Altitude |
-500m to 5,000m |
|||||
The RG-S2910XS-E switch series features high security, efficiency and intelligence with superior energy-saving capacity. The series is suitable for the following scenarios:
- Full gigabit access to LANs of large-scale enterprises and institutions, such as government buildings, universities and large manufacturing/ energy/ metallurgy enterprises
- Full gigabit access to business systems, such as hospitals, libraries, exhibition centers and websites
- IP phones, WLAN access points and high-definition cameras access
- Full gigabit access to server clusters and 10G high-bandwidth uplink
- Secure access through flexible and diverse security control policies that can defend against network viruses and attacks
Scenario 1
The RG-S2910XS-E Series Switch is deployed with the RG-S5750E/P Series / the RG-S78E Series Aggregation Switches. Also teaming up the RG-N18K Series at the core, the deployment provides Gigabit Ethernet downlinks and 10 Gigabit Ethernet uplinks to meet the ever-increasing number of network nodes and demanding bandwidth requirements.
Scenario 2
The RG-S2910XS-E Series Switch can be deployed with RG-S78E Series/ RG-S86E Series/ RG-N18K Series to provide Gigabit Ethernet downlinks and 10 Gigabit Ethernet uplinks to the simplified core network architecture. Different combinations provide comprehensive coverage for network deployment of large, medium and small sizes. Not only does it simplify the network architecture, but also significantly enhances the stability and efficiency of the network system.
|
Model |
Description |
|
RG-S2910-24GT4XS-E |
24 10/100/1000BASE-T Ports, 4 1G/10GBASE-X SFP+ Ports (non-combo), AC |
|
RG-S2910-48GT4XS-E |
48 10/100/1000BASE-T Ports, 4 1G/10GBASE-X SFP+ Ports (non-combo), AC |
|
RG-S2910C-24GT2XS-P-E |
24 10/100/1000BASE-T Ports (PoE/PoE+), 2 100/1000BASE-X SFP Ports (combo), 2 1G/10GBASE-X SFP+ Ports (non-combo), 1 Expansion Slot, AC |
|
RG-S2910-10GT2SFP-P-E |
10 10/100/1000BASE-T Ports, 2 100/1000BASE-X SFP Ports (non-combo), Port 1-8 support PoE/PoE+, AC |
|
RG-S2910C-24GT2XS-HP-E |
24 10/100/1000BASE-T Ports (PoE/PoE+), 2 100/1000BASE-X SFP Ports (combo), 2 1G/10GBASE-X SFP+ Ports (non-combo), 1 USB, 2 Expansion Slots, 2 Modular Power Slots, AC/DC |
|
RG-S2910C-48GT2XS-HP-E |
48 10/100/1000BASE-T Ports (PoE/PoE+), 2 100/1000BASE-X SFP Ports (combo), 2 1G/10GBASE-X SFP+ Ports (non-combo), 1 USB, 2 Expansion Slots, 2 Modular Power Slots, AC/DC |
|
Optional Accessories |
|
|
M2910-01XS |
1-Port 10G SFP+ Interface Module, for S2910XS PoE models |
|
M2910-01XT |
1-Port 10G copper Interface Module, for S2910XS PoE models |
|
M2910-02XS |
2-Port 10G SFP+ Interface Module, only for RG-S2910C-24GT2XS-P-E |
|
*M2910-02XT |
2-Port 10G copper Interface Module, only for RG-S2910C-24GT2XS-P-E * Planned for future support |
|
*M2910-04XS |
4-Port 10G SFP+ Interface Module, for S2910XS PoE models * Planned for future support |
|
RG-M5000E-AC500P |
AC Power Module, 370W Power Budget for PoE, up to 24 PoE ports or 12 PoE+ ports (only for RG-S2910C-24GT2XS-HP-E and RG-S2910C-48GT2XS-HP-E) |
|
RG-M5000E-DC500P |
DC Power Module, -32V to -72V DC input voltage, 370W Power Budget for PoE, up to 24 PoE ports or 12 PoE+ ports (only for RG-S2910C-24GT2XS-HP-E and RG-S2910C-48GT2XS-HP-E) |
|
RG-PA1150P-F |
AC Power Module, 740W Power Budget for PoE, up to 48 PoE ports or 24 PoE+ ports (only for RG-S2910C-24GT2XS-HP-E and RG-S2910C-48GT2XS-HP-E) |
|
FE-SFP-LX-MM1310 |
100M Multimode Interface Module (2km) |
|
FE-SFP-LH15-SM1310 |
100M Single-mode Interface Module (15km) |
|
Mini-GBIC-GT |
1000BASE-GT mini GBIC Transceiver |
|
Mini-GBIC-SX-MM850 |
1000BASE-SX mini GBIC Transceiver (850nm) |
|
Mini-GBIC-LX-SM1310 |
1000BASE-LX mini GBIC Transceiver (1310nm) |
|
Mini-GBIC-LH40-SM1310 |
1000BASE-LH mini GBIC Transceiver (1310nm, 40km) |
|
Mini-GBIC-ZX50-SM1550 |
1000BASE-ZX mini GBIC Transceiver (1550nm, 50km) |
|
Mini-GBIC-ZX80-SM1550 |
1000BASE-ZX mini GBIC Transceiver (1550nm, 80km) |
|
Mini-GBIC-ZX100-SM1550 |
1000BASE-ZX mini GBIC Transceiver (1550nm, 100km) |
|
XG-SFP-SR-MM850 |
10GBASE-SR, SFP+ Transceiver, MM (850nm, 300m, LC) |
|
XG-SFP-LR-SM1310 |
10GBASE-SR, SFP+ Transceiver (1310nm, 10km, LC) |
|
XG-SFP-ER-SM1550 |
10GBASE-SR, SFP+ Transceiver (1550nm, 40km, LC) |
|
GE-SFP-LX20-SM1310-BIDI |
Gigabit SFP BIDI Transceiver (TX1310/RX1550, 20km, LC) |
|
GE-SFP-LX20-SM1550-BIDI |
Gigabit SFP BIDI Transceiver (TX1550/RX1310, 20km, LC) |
|
GE-SFP-LH40-SM1310-BIDI |
Gigabit SFP BIDI Transceiver (TX1310/RX1550, 40km, LC) |
|
GE-SFP-LH40-SM1550-BIDI |
Gigabit SFP BIDI Transceiver (TX1550/RX1310, 40km, LC) |
|
XG-SFP-AOC1M |
10GBASE SFP+ Optical Stack Cable (included both side transceivers) for S2910 and S5750-H Series Switches, 1m |
|
XG-SFP-AOC3M |
10GBASE SFP+ Optical Stack Cable (included both side transceivers) for S2910 and S5750-H Series Switches, 3m |
|
XG-SFP-AOC5M |
10GBASE SFP+ Optical Stack Cable (included both side transceivers) for S2910 and S5750-H Series Switches, 5m |
