The Inspur TS860M5 supports up to 8 * next generation Intel® Xeon® scalable processors. Its excellent parallel computing power includes a maximum frequency of 3.8 GHz, 38 39 MB Level-3 cache, up to 224 * physical cores, and 448 * threads.Request a Quote
Inspur TS860M5 –New generation 8-socket mission critical server
The TS860M5 supports up to 8 * next generation Intel® Xeon® scalable processors. Its excellent parallel computing power includes a maximum frequency of 3.8 GHz, 38 39 MB Level-3 cache, up to 224 * physical cores, and 448 * threads.
Compared to other servers using the 1st generation Intel® Xeon® scalable processor series, the upgraded TS860M5 offers at least a 20% increase in compute performance and up to 20% increase in internal bandwidth. Thus, it fully meets the requirements of key applications such as large-scale transaction databases, memory databases, virtualization integration and integration, large-scale ERP and high-performance computing.
Modular I / O design supports half-height and half-height I / O modules, which can be flexibly configured according to user demand in I / O scalability.
The modular hard drive design supports up to 24 * 3.5 “hard drives and can be configured to support 12 * NVMe hard drives. It also supports configurations of up to 50 * 2.5” hard drives for SAP HANA applications.
The fully modular design allows each module to operate independently and be configured flexibly.
The TS860M5 has over 80 * RAS features supporting a fully modular fault tolerant design. Therefore, the TS860M5 is perfect for key applications with stringent reliability requirements.
External PCIe card supports hot-swapping for single cards and supports up to 12 * card hot-swapping operation of external PCIe cards; PSU supports N + N / N + M redundancy, supports cold and warm redundancy modes, and realizes swapping in microseconds; and system enthusiasts support N +1 redundancy.
The BIOS ROM supports BMC dual mirroring redundancy and redundancy modules, can be configured to support global clock redundancy and unlimited clock source switching, and has a very low probability of failure.
By configuring the system with an OLED display, users can check server asset information, view and set management IP address, monitor power consumption and chassis operating temperature, and view error information codes.
The processor and memory support offline light path diagnostics for easy identification of non-functioning components.
Embedded oscilloscope and in-depth hardware diagnosis and analysis functions can record and analyze fault signal and quickly determine fault source, software level code level diagnostics determine code level fault source and black box recording and instant screen recording and crash video recording is supported .
|Processor||Supports up to 8 * Intel® Xeon® series scalable processors:
Supports up to 28 cores with a frequency of 3.8 GHz
3* UPI interconnected chains with maximum speed of 10.4 GT/s per chain, maximum power of 205W
|Memory||Supports up to 96* DDR4 2400/2666/2933 MT/s RDIMM/LRDIMMs, can be configured to support 48* Optane™ PMems
Each CPU supports 12* DIMMs, eight CPUs support 96* DIMM/RDIMM/LRDIMMs; each DIMM supports up to 64 GB; each Optane™ PMems supports up to 128 GB
|Storage||Front: Supports up to 24* 3.5” or 50* 2.5” hard drives. Can be configured to support 12* NVMe SSDs
Internal: Each compute node supports 2* M.2 SSDs. System supports up to 4* M.2SSDs
|Storage controller||Dedicated internal RAID card slot supports a standard RAID controller NVMe controller interface on motherboard configurable with Intel NVMe RAID Key|
|Network port||The server supports 2* OCP/PHY cards
PHY: Supports 2*/4* cards at a 1 GB/10 GB network port configuration
OCP: Supports 1*/2* cards at a 10 Gb/25 Gb network port configuration
Standard PCIe Ethernet card: Supports 1/10/25/40/100 GB
|I/O expansion slot||Half-height I/O configuration: Expands up to 14* full-length, half-height, standard PCIe slots, with 2* internal RAID card slots; Full-height I/O configuration: Expands up to 10* full-length, full-height, standard PCIe slots, with 2* internal RAID card slots|
|Ports||Front: 2* USB3.0 port, 1* VGA port, 1* RJ45 port
Rear: 2*USB3.0 port, 1* VGA port, 1* 1 GB management port, 1* BMC serial port
Internal: 2* USB3.0 ports (per compute node)
|Fan||16* hot-swappable N+1 redundancy system fans|
|Power supply||Supports 4* 1300W/1600W PSUs (platinum), N+N/N+M redundancy|
|System management||Each compute node supports 1* BMC management module, supports IPMI, SOL, KVM Over IP, and virtual media, supports BMC mirroring redundancy|
|Operating system||Supports Windows/ Red Hat/ SUSE/ Centos/ Debian/ XenServer/ Oracle Linux/ ESXi/ Ubuntu etc|
|Size||448mm (W) x 175.5mm (H) x 800mm (D)|
|Weight||Less than 110kg at full load, please refer to the technical white paper for further details|
|Operating temperature||0℃~-40℃ depending on configuration (please refer to the technical white paper for more details)|