Inspur-NF8480M5

Inspur NF8480M5

The server supports Intel® Xeon® Scalable processors that implement an innovative “mesh” on-chip interconnect topology that provides low latency and high bandwidth between core controllers, memory, and I / O while increasing power efficiency.

Request a Quote
Inspur Brands

DESCRIPITION

Inspur NF8480M5 – High Expansion Computing Platform for Critical Application Loads

Key Features

Optimal computation

The server supports Intel® Xeon® Scalable processors that implement an innovative “mesh” on-chip interconnect topology that provides low latency and high bandwidth between core controllers, memory, and I / O while increasing power efficiency. Intel Ultra Path Interconnect (UPI) links are used to achieve direct communication between processors.

It supports 48 DDR4 DIMMs with a 50% increase in memory expansion and a 25% increase in bandwidth, thereby significantly reducing system lags caused by frequent IOs.

It supports up to 12 NVMe SSDs, with a maximum read performance of 3.5GB / s.

Stability and reliability

It adopts innovative E-SRA architecture with two-level write protection BMC software, and independent BIOS refreshing via BMC, which ensures safe and reliable firmware upgrade.

It takes advantage of IMD increased memory protection and PCIe hot swap technology.

With SCSA super current safety technology and very low impedance power supply, it has low line loss, high reliability, lower work space and higher maintenance efficiency.

Flexible expansion

The Inspur NF8480M5 supports hierarchical storage schemes, with up to 24 * 2.5 “/3.5” hard drives, 12 * U.2 NVMe SSDs and 2 built-in M.2 SSDs that can be used as OS boot drives, to satisfy the storage requirements of business scenarios. different. It supports 16 PCIe3.0 slots and 1 OCP slot. The PCIE bus resource allows flexible configuration, and supports free switching between U.2 NVMe hard drives and PCIe expansion cards based on customer requirements.

Quick recovery

The system adopts new generation LIDS (optical channel diagnosis system) and DSFI (deep system failure insight) technology which can have real-time full-time access to the underlying fault information, thereby greatly increasing the efficiency of troubleshooting and speeding up system error recovery.

Technical Specifications

Product model NF8480M5
Form factor 4U Rack mount
Processor It supports 2/4 new generation Intel® Xeon® scalable processor, TDP 205W
Chipset Intel® C620 Series Chipset
Memory Up to 48 DIMMs, with the maximum memory frequency up to 2933 MHz; it supports RDIMM/LRDIMM ,NVDIMM and Optane™ PMem
Storage Up to 24*2.5/3.5-inch SAS/SATA Drives,

up to 12*U.2 NVMe SSDs,

2 built-in M.2 SSDs, and soft RAID 0/1

Disk controller It supports 12G RAID card, RAID0, 1, 10, 1E, 5, 50, 6, 60, etc., and also super capacitor Cache protection, and provides RAID status migration and RAID configuration memory
Expansion slot Up to 16 PCIe3.0 and 1 OCP slot
Front I/O 2 USB 3.0 interfaces, 1 VGA interface, 1 RJ45 system serial port and LCD diagnostic display
Rear I/O 4 USB 3.0 interfaces, 1 VGA interface, 1 special MGMT port, 1 BMC diagnosis serial port and 1 system serial port
Network Supporting 40-gigabit; OCP NIC card and OCP PHY card, and NCS for OCP A

It supports network advanced characteristics including wake-up on LAN, network redundancy and load balancing

Management It supports remote management control, such as IPMI2.0, KVM over IP, SOL and SNMP; 1 rear BMC special MGMT port and 1 BMC diagnosis serial port for off-line fault diagnosis
Safety It supports TPM2.0
Operating system Microsoft Windows Sever, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, CentOS, VMware ESXi, etc.
Working temperature 0°C~40°C
Power supply It supports full power grid AC inputs, 240/336V high voltage DC input and -48V low voltage DC input

It supports platinum-level 550/800/1,300/1,600W CRPS power supply module, with and 1+1/2+1 /2+2/3+1 redundancy

Dimensions 448.0mm(W) * 175.5mm (H)* 812mm (D)
Working environment humidity 20%-80%RH