Mikrotik CSS 326-24G-2S + RM is a system switch with a 24-gigabit ethernet port and two must-have SFP + ports for all your needs
Are you tired of getting smart switches that are not that smart? Throw away all your worries because you are in the right place. Mikrotik CSS 326-24G-2S + RM is a must-have for all your needs. The Mikrotik CSS 326-24G-2S + RM is a system switch with a 24-gigabit ethernet port and two SFP + ports. The gadget is prepared to be used as a switch. In order to achieve its full use, you need to associate with the SwOS web interface. Cloud Smart Switch is consistent and easy to make it easier to exchange photos, documents and important information from your old device with your new one via USB Cable, Wi-Fi or PC in an instant.
|Dimensions||440 x 144 x 44 mm|
|Storage size||2 MB|
|Tested ambient temperature||-20°C to 70°C|
|PoE in||Passive PoE|
|PoE in input Voltage||10-30 V|
|Number of DC inputs||2 (DC jack, PoE-IN)|
|DC jack input Voltage||10-30 V|
|Max power consumption||19 W|
|10/100/1000 Ethernet ports||24|
Mikrotik CSS features
Cloud Smart Switch is an excellent product with remote or cloud management. With this you can filter and handle your wireless access points, without stretching a lot of settings. In addition, it provides you with the best adaptability and availability for your system. With remote cloud capabilities, it’s the most adaptable switch available for any setting. The features of the Cloud Smart Switch 326-24G-2S + RM have been highlighted in detail in the following paragraphs:
1. Unobstructed Layer 2 switching capacity
Layer 2 provides coordinated exchange of information between the two gadgets in the LAN. Layer 2 switches function by keeping the media table in control of MAC addresses. A switch’s MAC address table records the likely MAC devices to have learned and the associated physical ports they were last seen on. The outline of the information transferred by MAC tends to be inside the LAN and will not be known outside. Layer 2 switches can share VLANs to explicit switch ports, which reside in multiple layer 3 subnets.
2. IEEE 802.1Q VLAN
02.1X is the IEEE standard for Port Based Network Access Control (PNAC) which provides confirmation techniques for port-related gadgets. The Host and Session Authentication page in your switch Administration GUI is used to characterize what type of validation is used for each port premise. Per-port confirmation is an element that allows system executives to separate switch ports depending on the ideal verification type. The presence of such a port on this switch can provide you with many benefits.
3. Broadcast Storm Control
Traffic storms occur when packets jump over a LAN, making traffic over and reducing system execution. Traffic storm control spotlight can be used to anticipate interference to a Layer 2 port by communicators, multicast, or unicast traffic storms on the physical interface. In addition, Traffic Storm control allows you to monitor multicast and unicast traffic for 1 second.
4. Web-based GUI
The web-based GUI associated with the 326-24G-2S + RM makes managing information easier for users. So, you don’t have to be an expert to use this switch on your network.
5. Hardware Specifications
Gigabit Ethernet switch, equipped with two SFP + ports in a 1U rackmount case.