Juniper Ex Qfx

Juniper Ex Qfx

Juniper Ex Qfx – Juniper actually has 3 series for switch devices, starting from the Juniper EX series, Juniper QFX series to the Juniper QFabric System.

Request a Quote

DESCRIPTION

Apakah Juniper Ex Qfx itu?

Juniper actually has 3 series for switch devices, starting from the Juniper EX series, the Juniper QFX series to the Juniper QFabric System. Juniper Ex Qfx Series  itself also consists of several variants, starting from Juniper EX2200, Juniper EX2300, Juniper EX3300, Juniper EX3400, Juniper 4200, Juniper EX4550, Juniper 4600, Juniper EX8200 and Juniper EX9200. And this time we will discuss the smallest series from the EX series family, namely the Juniper EX2200. The Juniper EX2200 itself is intended as an economical solution for low-density access switch devices. The Juniper EX2200 is very suitable to be placed in the wiring closet area or in an open area placement model for enterprises that do not have a wiring closet facility. The Juniper EX2200 itself has a very low noise level so that its placement outside the wiring closet will not disturb workers in doing their work.

Advantages Juniper EX2200

The advantages of the Juniper EX2200 from the Juniper Ex Qfx

Juniper EX2200 from  Juniper Ex Qfx is a layer 2 switch equipped with basic layer 3 capabilities. It is called basic layer 3 switch capability because the Juniper EX2200 is only equipped with static routing capabilities and RIP on the base license. But with the addition of an enhance license, the Juniper EX2200 is able to perform layer 3 switching capabilities such as OSPF, Internet Group Management Protocol (IGMP v1 / v2 / v3), Protocol Independent Multicast (PIM), IEEE 802.1 Q-in-Q, Bidirectional Forwarding Detection ( BFD), Virtual Router Redundancy Protocol (VRRP) and Virtual Router / VRF-Lite. As an entry level switch in the EX series, the Juniper EX2200 is equipped with features that we can usually find in the middle series from other manufacturers, such as stacking capabilities – or in Juniper it is called a virtual chassis. But the application of this virtual chassis uses the uplink port,

Juniper EX2200

Juniper EX2200 model

The Juniper EX2200 from the Juniper Ex Qfx series itself consists of 4 models with 24 and 48 gigabit ethernet ports as well as a PoE option as a complement. The following models are available in the Juniper EX2200 series; Juniper EX2200-24T-4G, Juniper EX2200-24P-4G, Juniper EX2200-48T-4G and Juniper EX2200-48P-4G. The PoE standard that is owned by the Juniper EX2200 itself includes 802.3at and 802.3af which support power requirements of up to 30 watts per port. As we know that some access point devices with the 802.11ac wave 2 standard require a lot of power, the Juniper EX2200 can certainly be able to meet the power requirements required by these devices.