Ubiquiti Unifi AP

Ubiquiti Unifi AP

What is an Access Point?

Ubiquiti Unifi AP – An access point is a network device that contains a transceiver and antenna for transmitting and receiving signals to and from remote clients. With access points (AP) wireless clients can quickly and easily connect to wired LAN networks wirelessly. One of the most widely used Access Point products is the UniFI AP.

Or so that it is easier for us to understand it, you could say a tool used to connect devices in a network, from and to a wireless network.

Access Point Function?

functions as a data traffic regulator, allowing many clients to be connected to each other via a network (Network).

Or if you want to specify the function of the access point in more detail, are as follows:

1. Set up the AP to function as a DHCP server
2. Try the Wired Equivalent Privacy (WEP) and Wi-Fi Protected Access (WPA) features
3. Manage access based on MAC Address access device
4. As a hub / switch that acts to connect a local network with a wireless network / wireless

UniFi AP?

Ubiquiti UniFi works on a frequency of 802.11b / g / n 2.4Ghz. There is a 2bh internal MIMO antenna. TX Power reaches 100mW. POE adapter and included. Minimalist in shape and accompanied by mount-brackets for ceiling installation. Equipped with UniFi software that makes it easy for admin to monitor installed UniFi devices, as well as remotely reset and upgrade the firmware. UniFi Enterprise System Wifi includes Unifi controller software. The software is installed on any PC or Mac in the network and is easily accessed via a standard Web Browser. Using the Unifi Controller software, the company is without special training. Real-time status, automatic device Steam detection, map loading and advanced security are all seamlessly integrated.

Wireless extension

takes advantage of wireless downlinking. One unifi AP uplink cable supports 4 wireless downlinks, which allows wireless adoption of the device under standard circumstances and real-time network topology changes. Our standard model is 802.11n MIMO UniFi AP. Capable of speeds up to 300Mbps with ranges up to 400ft.

Powerful Hardware

The UniFi AP device features the latest in 802.11n WiFi technology. breakthrough speed, and incredible range.

Intuitive UniFi Controller Service

Install, configure and manage all your UniFi AP devices with UniFi’s intuitive and easy-to-learn user interface (no special training required).

Expendable

Limited scalability, Build a wireless network according to small or large needs. Start with one (or upgrade to 3-pack) and expand to the thousands while maintaining a single unified management system.

Specification

Dimensi	20 x 20 x 3.65 cm
Berat	290g ( 430g with Mounting Kits)
Tombol	Reset
Antena	2 Integrated (Supports 2 x 2 Mimo with Spatial Diversity)
Wi-Fi Standar	802.11 b/g/n
Tampilan Jaringan	1 x 10/100 Ethernet Port
Power Supply	24V, 0.5A PoE Adapter Included
Power Method	Passive Power over Ethernet (12 – 24V)
Maximum Power Consumption	4 W
Max TX Power	20 dBm
BSSID	Up to Four Per Radio
Penyimpan Daya	Support
Mounting	Wall / Ceiling (Kints Included)
Lingkungan	Operating Temperature : -10 to 70 deg C ( 14 to 158 deg F) Operating Humidity : 5 – 80% Condensing
Link Product	http://www.ubnt.com/