Ruijie Indonesia RG-AP630(IODA)

Model		RG-AP630(IODA)
Target Deployments		For big campus, wireless city, harbour, storage room, mine
Basic Specifications	Radio	Concurrent dual-radio dual-band
	Protocol	802.11a/b/g/n/ac
	Operating Bands	802.11b/g/n: 2.4GHz to 2.483GHz
		802.11a/n/ac: 5.150GHz to 5.350GHz, 5.47GHz to 5.725GHz, 5.725GHz to 5.850GHz
		(vary depending on countries)
	Antenna	Built-in Omnidirectional Smart Antenna (support external/internal antenna switching)
	Antenna Gain	4dBi
	Max Throughput	450Mbps@2.4GHz
		1.3Gbps@5GHz
		1.75Gbps per AP
	Spatial Streams	3
	Modulation	OFDM: BPSK@6/9Mbps
		QPSK@12/18Mbps
		16-QAM@24Mbps
		64-QAM@48/54Mbps
		DSSS: DBPSK@1Mbps
		DQPSK@2Mbps
		CCK@5.5/11Mbps
		MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM and 256QAM
	Receiver Sensitivity	11b: -99dBm(1Mbps), -93dBm(5.5Mbps), -90dBm(11Mbps)
		11a/g:-93dBm(6Mbps), -85dBm(24Mbps), -82dBm(36Mbps), – 77dBm(54Mbps)
		11n:-92dBm@MCS0, -73dBm@MCS7, -92dBm@MCS8, -73dBm@MCS15
		11ac HT20: -90dBm (MCS0) , -63dBm (MCS9)
		11ac HT40: -85dBm(MCS0) , -60dBm (MCS9)
		11ac HT80: -82dBm(MCS0) , -58dBm (MCS9)
	Maximum Transmit Power	27dBm
		Note: The transmit power is configurable to up to 15dBm in 1dBm steps. The actual transmit power depends on local laws and regulations.
	Adjustable Power	1dBm
	IP Rating	IP67
Port	Service Port	1 10/100/1000Mbps ETH1/PoE IN port (RJ-45 connector)
		1 SFP port (combo with ETH1)
	Management Port	1 Console Port(RJ45 or Bluetooth)
Power	Power Supply	PoE+ (802.3at)
	Power Consumption	<25W
WLAN	Maximum clients per AP	Up to 256
	SSID capacity	Up to 16 per radio
		Up to 32 per AP
	SSID hiding	Support
	Configuring the authentication mode. Encryption mechanism and VLAN attributes for each SSID	Support
	Remote Intelligent Perception Technology (RIPT)	Support
	X-speed	Support
	Intelligent load balancing based on the number of users or traffic	Support
	STA control	SSID/radio-based
	Bandwidth control	STA/SSID/AP-based speed control
	Preference for 5GHz (band select)	Support
	Wireless position tracking	Support
	Dynamic Frequency Selection(DFS)	Future Release Support
Security	PSK, Web, and 802.1x authentication	Support
	Data encryption	WPA (TKIP) , WPA2 (AES), WPA-PSK, and WEP (64 or 128 bits)
	QR code authentication	Support
	SMS authentication	Support
	PEAP authentication	Support
	Data frame filtering	Whitelist, static/dynamic blacklist
	User isolation	Support
	Rogue AP detection and countermeasure	Support
	Dynamic ACL assignment	Support
	WAPI	Support
	RADIUS	Support
	CPU Protection Policy (CPP)	Support
	Network Foundation Protection Policy (NFPP)	Support
	Wireless Intrusion Detection System(WIDS)	Support
	Wireless Intrusion Prevention System (WIPS)	Support
Routing	IPv4 address	Static IP address or DHCP reservation
	IPv6 CAPWAP tunnel	Support
	ICMPv6	Support
	IPv6 address	Manual or automatic configuration
	Multicast	Multicast to unicast conversion
Management and Maintenance	Network management	SNMP v1/v2C/v3, Telnet, SSH, TFTP, and FTP and web management
	Visualized wireless heat map analysis	Support
		(need to integrate with SNC)
	Real-time spectrum analysis	Support
		(need to integrate with SNC)
	Fault detection and alarm	Support
	Cloud AC management	Support
	Statistics and logs	Support
	FAT/FIT switching	The AP working in FIT mode can switch to the FAT mode through the RG-WS wireless AC.
		The AP working in FAT mode can switch to the FIT mode through a local console port or Telnet.
External Characteristics	Lock	Support
	LED Indicators	Power status and WDS signal strength
Relevant Standard	Wi-Fi Alliance Certification	Support
	Safety Standard	GB4943, UL/CSA 60950-1, EN/IEC 60950-1, EN/IEC 60950-22
	EMC Standard	GB9254-2008, EN301 489, EN55022, FCC Part15
	Health Standard	FCC Bulletin OET-65C ,EN 50385, IC Safety Code 6
	Radio Standard	FCC Part15,EN300328, EN301893
	Vibration Standard	GB/T 2423
	Dimensions (W x D x H) (mm)	276 × 246 × 90
Specifications	Weight	<2.5kg
Work Environment	Temperature	Operating Temperature: -40°C to 55°C
		Storage Temperature: -40°C to 70°C
	Humidity	Operating Humidity: 5% to 95% (non-condensing)
		Storage Humidity: 5% to 95% (non-condensing)
Installation Mode		Wall/pole-mount installation

Outdoor Antenna

Model		RG-ANTx3-2400D	RG-ANTx3-5800D	RG-ANTx3-2400&5800(O)
Type of External Antenna		Directional	Directional	Omnidirectional
Electrical Specifications	Frequency range	2.4 to 2.483 GHz	5.125 to 6.100 GHz	2.4 to 2.5 GHz; 5.125 to 6.100 GHz
	Gain	3 × 15 dBi	2 × 19 dBi (vertical) + 16 dBi (dual inclined planes)	8 dBi
	Horizontal beamwidth	65°	21°	360°
	Vertical beamwidth	16°	16°	17°
	Front-to-back ratio	≤ -25 dB	≤ -25 dB	≤ -25 dB
	VSWR	≤ 1.5	≤ 1.5	≤ 1.5
	Polarization	2*VP（vertical polarization）+1*HP(horizontal polarization)	±45° and vertical polarization	VP（vertical polarization）
	Input impedance	50 ohms	50 ohms	50 ohms
Mechanical Specifications	Mounting mode	Pole mounting (pole diameter 30 to 50 mm)	Pole mounting (pole diameter 50 to 120 mm)	Pole mounting (pole diameter 40 to 70 mm)
	Temperature range	-40°C to +60°C	-40°C to +60°C	-40°C to +60°C
	Unit weight	2.3 kg	1.3 kg	1.2 kg
	Dimensions	400 × 240 × 35 mm (L × W × H)	380 × 380 × 33 mm (L × W × H)	Φ145 × 330 mm
	Connector	3 × N-K	3 × N-K	6 × N-K

High Performance & Reliability

• 802.11ac Wireless Superior Performance The

RG-AP630 (IODA) supports 802.11n@2.4GHz and 802.11ac@5GHz offering access rates up to 1.75Gbps. Excellent and highly optimized wireless performance is very satisfying for wireless users, increasing the number of concurrent users and increasing signal coverage.

• Built-in Smart Antenna of the AP630 (IODA)

Equipped with a built-in antenna, the RG-AP630 (IODA) can achieve precise antenna beam switching based on the location of the access device, ensuring an optimal wireless experience. The AP also supports internal and external antenna switching to flexibly adapt to location and venue.

The Most Flexible Gigabit Uplink in the Industry The

RG-AP630 (IODA) offers a 10/100 / 1000Base-T Ethernet uplink port which makes the LAN port a barrier to wireless access, and a 1000M SFP combo port that adapts to wired network structures under different user scenarios . Base-X SFP ports capture data transmission workloads for optimal network deployment.

• Easy-to-use

mount kits Customizable mount-kits are available by default for painless deployment optimization. The AP can easily be adjusted -60 ° to 60 ° horizontally and -60 ° to 90 ° vertically to adapt to various scenarios.

• All-in-one Package for Painless

Placement Outdoor AP The RG-AP630 (IODA) offers a one-stop installation package. Everything you need is included, from an external antenna to a lightning rod and coaxial cable, for easy outdoor deployment.

• Flexible WDS Mode

APapplies WDS (Wireless Distribution System) to support interconnection of multiple APs or wireless bridging under 5 hops. Wireless bridging is achievable even over long distances. Outdoor APs also support point-to-multipoint bridging (CPE application scenarios) for more flexible networking. Outdoor deployment troubleshooting features to support large-scale and long-range high-speed wireless coverage.

• Smart Device Recognition

AP supports smart recognition of devices running major operating systems such as iOS and Android.

• Industry leading Local Forwarding Technologyindustry

Usingleading local forwarding technology, AP removes traffic barriers from the wireless access controller. Deploying with the Ruijie RG-WS Wireless Controller Series, users can flexibly pre-configure data forwarding modes from outdoor APs. The AP also controls whether data will be forwarded through the wireless controller. Local forwarding technology can forward large-scale, delay-sensitive, and real-time data transmission to greatly reduce traffic pressure on wireless LAN controllers and meet the high traffic transmission requirements of 802.11ac networks.

• The SeamlessRoaming Experience

APcombines with the RG-WS Wireless Controller in a seamless manner, allowing wireless users to roam seamlessly across Layer 2 and Layer 3 networks without data interruption.

• Abundant QoS Policy

AP supports a variety of QoS policies. For example, it provides a WLAN / AP / STA based bandwidth limiting mode that prioritizes main services over others.

• Outstanding Environmental Adaptability The

outdoor AP offers an IP67 rated enclosure that meets waterproof, dustproof, moisture-proof and fire-resistant requirements to withstand harsh environments such as wind erosion, rain and high humidity. These features greatly extend the life of the equipment and effectively reduce maintenance costs.

• Wide Operating Temperature

All AP components and enclosures can withstand a wide temperature range from -40 ° C to 55 ° C without any impact on stability and life span. The design ensures metal components cool efficiently at high temperatures. The built-in heating module guarantees stable operation under freezing conditions.

Comprehensive Security Policy

• Data Encryption

Outdoor APs offer protected Wi-Fi access with the support of advanced encryption technologies such as WEP, TKIP and AES, which ensure the security of wireless network data transmission.

• Virtual AP

technology With virtual AP technology, APs can offer up to 16 ESSIDs (per radio) and 16 802.1Q VLANs. Network administrators can separately encrypt and isolate subnets or VLANs that share the same SSID. Separate authentication modes and encryption mechanisms for each SSID can also be configured flexibly.

• standard CAPWAP encryption

CAPWAP (Control and Provisioning of Wireless Access Points)enables communication between the RG-WS Wireless Controller and the outside AP. This standard ensures safe data transmission.

• RF Security

In cooperation with the RG-SNC Smart Network Commander and RG-WS Ruijie Wireless Controller, the AP enables an RF probe scanning mechanism to detect unauthorized access points or other sources of RF interference. Once detected, the AP will alert the network administrator to monitor potential threats and usage status in the wireless environment.

• User Access Control

APsupports various authentication methods such as Web, 802.1x, MAC address and local authentication. AP also supports Ruijie’s advanced BYOD Security Management Platform (SMP) Solution which complies with standard access control systems. The system has a set of control policies in terms of user access, authorization, host compliance checking, network behavior monitoring, network attack defense, etc. All of these control features ensure that users are authenticated before securely accessing network services.

Wireless Protection

Together with the Ruijie RG-SNC Smart Network Commander and RG-WS Wireless Controllers, the AP provides a variety of robust wireless security features such as Wireless Intrusion Detection System (WIDS), RF Interference Location, Naughty AP Countermeasures, Anti-ARP Spoofing , and DHCP protection for a truly secure and reliable wireless network.

• IPv6 Wireless AccessIPv6

A comprehensivefeature is available to enable IPv6 forwarding on the wireless network. Both IPv4 and IPv6 users can connect to the AC via the tunnel, enabling IPv6 applications to be covered by the wireless network.

Flexible Device Management Mode

• Flexible Switching Between FAT and FIT Mode The

AP supports flexible switching between FAT and FIT modes according to different industrial network requirements. When there are multiple APs, the user can adopt the FAT mode for easy independent network establishment. For large scale networks, the AP can operate in FIT mode which allows centralized management of all APs and other aspects such as security, traffic management, QoS and IP management when used with the RG-WS Wireless Controller. Smooth transition from one to another, the AP fully protects the user’s investment.

• Simple Deployment With Zero Configuration

Under FIT mode, no AP configuration is required prior to deployment. Also, no manual configuration is required for on-site installation, maintenance, or replacement. Automatic configuration can be completed via air conditioner. Easy-to-use features that greatly reduce workload and investment costs.

• Comprehensive Remote

Management The RG-WS Wireless Controller can manage all AP operations remotely and centrally such as channel, power rating, SSID configuration, security configuration, VLAN division and so on. This feature increases security and simplifies wireless network management.

• PoE Port For Easy Use & Maintenance The

RG-AP630 (IODA) supports the PoE 802.3at standard. By connecting to the HPoE switch via the AP AP port, the outside AP can obtain power and support data transmission over the cable. Network administrators can perform the configuration remotely. It also solves the problem of unstable resources, simplifies the installation process and maximizes cost savings.

Model	Description
RG-AP630(IODA)	Outdoor Wireless Access Point, IP67 rating, built-in omnidirectional smart antenna and lightning arrester, 3×3 MIMO, 3 spatial streams, support internal/external antenna switching, support concurrent 802.11a/b/g/n/ac, FAT/FIT mode, PoE+ (Installation Mount-Kit included, but PoE adaptor sold separately)
Optional Accessories
RG-S2910-24GT4SFP-UP-H	24 10/100/1000BASE-T ports for downlink and 4 Gigabit SFP ports (non-combo) for uplink. To support HPOE(Port1~4), POE+, POE, 1 console port
Optional External Antennas
RG-ANTx3-2400D	2.4GHz MIMO Outdoor Directional Antenna Kit, include: 15dBi panel antenna (1 set); 1-meter N-N coaxial cables (3 sets); waterproof materials (1 set)
RG-ANTx3-5800D	5.8GHz MIMO Outdoor Directional Antenna Kit, include: 19dBi panel antenna (1 set); 1-meter N-N coaxial cables (3 sets); waterproof materials (1 set)
RG-ANTx3-2400&5800(O)	2.4GHz & 5.8GHz MIMO Outdoor Omnidirectional Antenna Kit, include: 8dBi panel antenna (1 set); 1-meter N-N coaxial cables (6 sets); waterproof materials (2 sets)