Body Temperature Camera USS-TIC600
Body Temperature Camera USS-TIC600 Automatic thermal temperature measurement and filtering system.
DESCRIPTION
Body Temperature Camera USS-TIC600 Automatic thermal temperature measurement and filtering system
Dual-spectrum imaging
USS-TIC600 Thermal imaging principle, no perception, no contact, take a human face and take the temperature. Thermal ： 384 X 288 ， Visible 2MP
Detection distance
±0.2°C（with black body) 3-10 meter
Single-IP and dual-channel
Direct view visible light imaging and thermal imaging at the same time one IP address, faster and more convenient
Coaxial amplification
The visible light lens is connected to focus to the alarm area when the thermal lens generates an alarm
Advantages
High-end ，with black body，High accuracy, High quality
MODEL |
TIC600 |
| Thermal | |
| Sensor type | Uncooled Focal Plane Arrays |
| Pixel size | 25μm |
| Maximum image size | 384*288 |
| Video frame rate | Max 25fps |
| NETD | ≤60mk |
| Response waveband | 8~14μm |
| Focal length | 18mm |
| Iris | F1.0 |
| Angle of View (H*V) | 25°*19° |
| Detection distance | 3~10 meters |
| Visible | |
| Sensor | 1/1.8″，progressive scan，CMOS |
| Focus | Manual |
| Iris | Max F1.6 |
| Minimum illumination | Colour : 0.001Lux(F1.6, AGC ON) B/W : 0.0002Lux(F1.6, AGC ON) |
| S/N | ＞52dB |
| Defog | Optical & digital |
| Day/Night | IR-cut filter with auto switch (ICR) |
| Video Frame rate | 1920*1080, Max 30fps |
| WDR | 120dB |
| OSD | Up to 8 OSDs |
| SD card | Micro SD, up to 256GB |
| ANR | Support |
| Network protocols | IPv4, IGMP, ICMP, ARP, TCP, UDP, DHCP, PPPoE, RTP, RTSP, RTCP, DNS, DDNS, NTP, FTP, UPnP, HTTP, HTTPS, SMTP, 802.1x, SNMP, QoS |
| Focal length | 3.8~16mm |
| Black-body | |
| Accuracy | ±0.2℃（Single point） |
| Stability | ±(0.1~0.2)℃/30min |
| Dimension | 135mm x 135mm x150mm |
| Power | 100V~240V AC 50/60Hz |
| Power consumption | 60W |
| Radiation area | φ70mm |
| General | |
| Temperature measurement accuracy | |
| Environment temperature range | 16°C~32°C |
| Target temperature range | 32°C~42°C |
| Temperature measurement accuracy | ≤±0.3℃ |
| Interface | |
| Infrared machine head | Aviation plug |
| Network interfaces | RJ45 |
| Power | |
| Power | DC12V |
| Power consumption | ≤15W |
| Weight | |
| Infrared machine head | <5Kg |
| Black-body | <3.5kg |
| Function | |
| Alarm | Multi abnormal temperature point alarm and automatic capture |
| Capture | Capture when alarm is triggered |
| Temperature display | Simultaneous display of temperature in infrared and visible light images |
| Correction of body and surface temperature | Support automatic temperature calibration |
| Environmental adaptability | |
| Working humidity | ≤80%RH(non-condensing) |
| Notes | |
| PC requirement | CPU I5 or more / memory 8G. Operating system win10, 64-bit.If you have a laptop, you must have a network port. |
- The longer the distance, large scenes can also be filtered accurately and quickly
- This system contains black-body, and the temperature measurement accuracy is ≤0.3 ℃
- Simultaneous display of visible and infrared thermal imaging temperature
- Real-time thermal imaging, multi-target automatic temperature measurement
- Supports automatic retrieval when the alarm is triggered to provide evidence after the event
- Supports automatic calibration of body and surface temperatures to make temperature measurements more accurate
- Supports historical alarm record requests
- The entire system ships with a tripod, software, etc.
