Face Temperature Detection OET-213H-BTS1

Face Temperature Detection OET-213H-BTS1

Face Temperature Detection OET-213H-BTS1 – Face Recognition Access Control Terminal with Digital Detection Module.

Request a Quote

DESCRIPTION

Face Temperature Detection OET-213H-BTS1 – Face Recognition Access Control Terminal with Digital Detection Module.

  • OET-213H-BTS1 Face Temperature Detection Supports wrist temperature non-contact detection, supports warning of people with abnormal body temperature
  • Supports body temperature detection and personnel information binding, which can quickly confirm personal information and perform body temperature detection
  • Support configure threshold values temperature detection, and personnel access authority can be configured through the temperature detection threshold value
  • Non-contact wrist temperature detection module, the measurement range is between 30 ℃ to 45 ℃, measurement accuracy can reach 0.1 ℃, measurement deviation is less than or equal to 0, 3 ℃, and the measurement distance is between 1cm to 3cm
  • Deep learning algorithm model based on UNV independent intellectual property rights, face recognition accuracy rate> 99%, error rate <1%
  • Integrated internal learning special chip, support local offline recognition, capacity of 10,000 faces , face whitelist (1: N)
  • Fastest recognition time 0 , 2 seconds, various blending mode models are used to reduce the error rate and increase the pass rate of the Send
  • WDR, 2MP (1080P) low-illumination wide-angle camera and F1.6 large aperture lens to capture high-quality images with a variety of complex lighting scenes
  • Support anti-detection spoofing based on deep learning algorithms, effective against fraud such as photos and videos
  • Supports face measurement and human measurement to adapt quickly to ambient light
  • Recommended height for facial recognition: between 0.8 m and 2.2 m , facial recognition distance: 0, 2 m to 2.9 m
  • supporting sleep mode screen, keep the minimum brightness to prevent glare at night
  • Support add up to 6 photos basic library for one person
  • supports video capture,ONVIF protocol support
  • authentication supportsface, card, password and QR code for Control doors open
  • Two-way audio with indoor monitor
  • Built-in 4GEMMC front end storage, stable and reliable, up to 8,000 capacity events (with pictures)
  • Support tamper protection, support door open time limit and time exceed alarm function to keep doors open during active fire alarm

Features Parameter

Description

Operation System Linux
Face Recognition Accuracy Rate >99%
Face Recognition Time 200ms
Face Capacity 10,000
Card Capacity 100,000
Storage Capacity 4GB
Event Capacity 8,000 (with images)
Measurement Range 30℃ – 45℃
Measurement Accuracy 0.1℃
Measurement Deviation ≤0.3℃
Measurement Distance 1cm-3cm
Authentication Mode Face Whitelist∶ (1∶ N)
Card:(1:N)
Face +Body temperature
Mask Detection
Door Opening Method Face, Password, QR code, Card
Communication Mode 10/100Mbps adaptive network port
Card Type Mifare 1 Card
User Management Support user library addition, deletion, update
Record Management Support local recording and real-time upload
Interface LAN×1, Wiegand Input×1, Wiegand Output×1, RS485×1, Alarm Input×2, Alarm Output×1, USB2.0×1, Lock×1, Door Contact ×1, Exit Button×1
Power Supply Input 12V±25% DC
Screen Touch Screen, Size:7 inch, Resolution: 600×1024
Camera Dual Lens, 2MP, 1080P
Supplement Light LED soft light and infrared light
Dimensions (L×W×H) For terminal : 134.0mm×33.0mm×305.0mm
Working Environment For terminal: -20℃-65℃, Relative Humidly<95% (non-condensing)
For module: 15℃-30℃
Protection Level Both terminal and module: IP 54
Application Situation Indoor, No wind