Face Temperature Detection OET-213H-BTS1
Face Temperature Detection OET-213H-BTS1 – Face Recognition Access Control Terminal with Digital Detection Module
DESCRIPTION
Face Temperature Detection OET-213H-BTS1 – Face Recognition Access Control Terminal with FaceDigital Detection Module
- Temperature DetectionOET-213H-BTS1 Supports non-contact detection of wrist temperature, supports warning of people with abnormal body temperature
- Supports body temperature detection and binding of personnel information, which can quickly confirm personnel information and carry out body temperature detection
- Support configure the temperature detection threshold value, and the personnel access authority can be configured through the temperature detection threshold value
- Non-contact wrist temperature detection module, the measurement range is between 30 ℃ to 45 ℃, measurement accuracy can reach 0.1 ℃, measurement deviation is less than or equal to 0.3 ℃, and the measurement distance is between 1cm to 3cm
- Deep learning algorithm model is based on UNV independent intellectual property rights, facial recognition accuracy rate> 99%, error rate <1%
- Integrated internal learning special chip , supports local offline recognition, capacity s 10,000 faces, face whitelist (1: N)
- Fastest recognition time 0.2 seconds, various blending mode models are used to reduce error rates and increase the pass rate of Send
- WDR, 2MP (1080P) low illumination wide-angle camera and F1 large aperture lens .6 for capturing high-quality images with a variety of complex lighting scenes
- Supports anti-spoofing detection based on deep learning algorithms, effective against fraud such as photos and videos
- Supports face measurement and human metering to adapt quickly to ambient light
- Recommended high for face recognition: between 0.8 m and 2.2 m , facial recognition distance: 0.2 m to 2.9 m
- Support screen sleep mode, keep minimum brightness to prevent glare at night
- Support add up to 6 photos basic library for one person
- Support video capture , support ONVIF protocol
- Support face, card, password and QR code authentication to control p open intu
- Two-way audio with indoor monitor
- Built-in 4G EMMC front end storage, stable and reliable, up to 8,000 capacity events (with pictures)
- Support tamper protection, support door open time limit and time exceed alarm function to keep doors open during fire alarm is active
Specification
Features Parameter |
Description |
Operation System | Linux |
Face Recognition Accuracy Rate | >99% |
Face Recognition Time | 200ms |
Face Capacity | 10,000 |
Card Capacity | 100,000 |
Storage Capacity | 4GB |
Event Capacity | 8,000 (with images) |
Measurement Range | 30℃ – 45℃ |
Measurement Accuracy | 0.1℃ |
Measurement Deviation | ≤0.3℃ |
Measurement Distance | 1cm-3cm |
Authentication Mode | Face Whitelist∶ (1∶ N) |
Card:(1:N) | |
Face +Body temperature | |
Mask Detection | |
Door Opening Method | Face, Password, QR code, Card |
Communication Mode | 10/100Mbps adaptive network port |
Card Type | Mifare 1 Card |
User Management | Support user library addition, deletion, update |
Record Management | Support local recording and real-time upload |
Interface | LAN×1, Wiegand Input×1, Wiegand Output×1, RS485×1, Alarm Input×2, Alarm Output×1, USB2.0×1, Lock×1, Door Contact ×1, Exit Button×1 |
Power Supply | Input 12V±25% DC |
Screen | Touch Screen, Size:7 inch, Resolution: 600×1024 |
Camera | Dual Lens, 2MP, 1080P |
Supplement Light | LED soft light and infrared light |
Dimensions (L×W×H) | For terminal : 134.0mm×33.0mm×305.0mm |
Working Environment | For terminal: -20℃-65℃, Relative Humidly<95% (non-condensing) For module: 15℃-30℃ |
Protection Level | Both terminal and module: IP 54 |
Application Situation | Indoor, No wind |